Xerox 721P88200 - Manual (Page 68)

IPS APPLICATION MIGRATION
4-16 DOCUPRINT IPS SOLUTIONS GUIDE
If you use these 3800-compatible FormDefs in applications you plan
to print on DocuPrint IPS printers, you should perform either of these
procedures:
• Convert your 3800 application to a cut sheet application as
described in “Converting 3800 applications” earlier in this
section. This is the preferred solution.
•
If you choose not to convert your 3800 application, you can
force PSF to process the PRESENT and DIRECTION operands
in the FormDef. Because PSF normally does not send these
values to a cut sheet printer, such as the DocuPrint IPS
printers, you must include N_UP 1 in your FormDefs to force
this processing. This command causes PSF to pass the
PRESENT and DIRECTION operands to any cut sheet printer.