Xantrex Technology PROwatt 1000 - Manual (Page 20)

PROwatt 1000 Features
2–4
Back Panel (DC End)
Figure 2-2 Back Panel: DC End
D esigned in C anada
Assem bl ed in C hi na
➀ ➁ ➂
➃
Feature Description
➀ ➀ ➀ ➀ Ventilation Openings For safety and proper operation of the
inverter, these openings (and the openings on the bottom of the
inverter) must not be obstructed. When the inverter is mounted,
these ventilation openings must not point up or down. In other
words, neither the front panel (AC end) nor the back panel (DC end)
should point up or down.
➁ ➁ ➁ ➁ Knockout for AC Wiring Provides access to the internal AC output
terminal blocks if you want to connect the inverter to an existing AC
circuit.
➂ ➂ ➂ ➂ Chassis Ground Screw Connects to earth ground, to vehicle
chassis, or to DC grounding bus or engine’s negative bus (in marine
installations).
➃ ➃ ➃ ➃ Positive and Negative DC Cabling Terminals
PROWatt100.book Page 4 Friday, January 5, 2001 3:03 PM