beautypg.com

Step 2: installing the hardware – Zoom ADSL X3 User Manual

Page 8

background image

8

ADSL X3 User's Guide

4444

Click Installation Wizard.

5555

Click ADSL X3 Modem to start the software installation, then
click Next when prompted.

6666

When the installation is complete, click Finish, then click
Exit.

7777

Close any applications that may be open, then remove the CD
from the CD-ROM drive.

8888

Shut down the computer.

Congratulations! You have installed the software. Now, continue

with the next section, Installing the Hardware.

Step 2: Installing the Hardware

1111

Shut down your computer (if it is not shut down already).

2222

Connect the modem to the computer’s Ethernet jack or to a
network device (such as, a hub).
! If you are using a computer’s Ethernet jack: Plug one

end of the Ethernet cable into the modem’s

ETHERNET jack and plug the other end into your
computer’s Ethernet jack.

!

If you are connecting the X3 directly to a hub, switch,

wireless access point, or other network device:

Plug

one end of the Ethernet cable into the modem’s

ETHERNET jack and the other end into the network

device’s Ethernet jack (which is typically called an Uplink

or Expansion port).