Loading paper in tray 6 for 2-sided printing, Loading paper in tray 6 for 2-sided printing -27 – Xerox 5550 User Manual

Page 88

Text mode
Original mode

Loading Paper

Phaser® 5550 Printer

4-27

Push the tray completely into the printer.

If prompted on the control panel, press the OK button to accept the paper size and type
that are shown. If you have changed the paper size or type, do the following:

Select

Change setup

and then press the OK button.

Select the paper type, and then press the OK button.

Select the paper size, and then press the OK button to save your selection.

In the printer driver, select either the paper type or the tray you loaded as the paper source.

Loading Paper in Tray 6 for 2-Sided Printing

Use Tray 6 as a high capacity feeder for 2-sided printing of Letter, A4, Executive, and B5 JIS
paper. Paper can only be loaded long-edge feed in Tray 6.

Pull out the tray.

5550-032

5550-112