Macintosh os x, version 10.3 and higher, Macintosh os x, version 10.3, Macintosh os x, version 10.3 and higher -20 – Xerox 5550 User Manual
Page 50: Macintosh os x, version 10.3 -20
Macintosh OS X, Version 10.3 and Higher
Phaser® 5550 Printer
3-20
Macintosh OS X, Version 10.3 and Higher
This section includes:
■
■
■
Macintosh Troubleshooting (Mac OS X, Version 10.3 and Higher)
Macintosh OS X, Version 10.3
Set up your printer using Bonjour (Rendezvous), create a desktop USB connection, or use an
LPD/LPR connection for Macintosh OS X, version 10.3 and higher.
Bonjour (Rendezvous) Connection
To install the printer driver from the Software and Documentation CD-ROM:
1.
Insert the CD-ROM into the CD-ROM drive and select the VISE installer to install the
printer software.
2.
When installation is complete, open the Printer Setup Utility for Mac OS X, version
10.3.x.
Note:
To locate utilities on the Macintosh hard drive, open the Applications folder, and
then open the Utilities folder.
3.
Confirm that the first drop-down menu is set to Bonjour (Rendezvous).
4.
Select the printer in the window.
5.
Select Xerox from the list of manufacturers in the lower drop-down menu.
6.
Select the appropriate printer model from the list of available devices.
7.
Click the Add button.
See also:
Online Support Assistant at
USB Connection
To install the printer driver from the Software and Documentation CD-ROM:
1.
Insert the CD-ROM into the CD-ROM drive.
■
Open the Printer Setup Utility for Mac OS X, version 10.3.x.
Note:
To locate utilities on the Macintosh hard drive, open the Applications folder, and
then open the Utilities folder.
2.
Click the Add button.
3.
Select USB from the drop-down menu.