Xerox 5550 - Manual (Page 172)

Clearing Paper Jams
Phaser® 5550 Printer
6-28
3. If the paper size shown on the control panel does not match the size of the paper in the
tray, do the following:
a. Select Change Paper Size , and then press the OK button.
b. Select Auto Sensed, Custom , or a listed paper size, and then press the OK button.
c. If you selected Custom , specify the width and height of the paper. Select Custom
Width , press the OK button, scroll to the width of the paper, and then press the
OK button. Select Custom Height , press the OK button, scroll to the height of the
paper, and then press the OK button.
4. Open Door A.
Warning: Use caution; some components inside Door A may by hot.
5550-001
D
A
E
A