Zoom 4420-A - Manual (Page 6)

6 Zoom AP+4 User Guide
1
Installing the AP+4
This chapter provides basic instructions for connecting the
hardware and configuring the AP+4 using the Setup Wizard. If
you have already done this by following the instructions in the
printed Quick Start, skip to Chapter 2, Wireless Settings, on
page 20.
AP+4 Back Panel Connectors
Connector Description
RESET To reset the modem to its factory settings, insert a
paper clip and press and hold for 10 seconds.
WAN This port connects to the LAN or Ethernet port of an
ADSL or cable modem, using an Ethernet cable.
LAN 1 - 4 These Local Area Network ports connect via Ethernet
cable to up to four computers, game stations or other
network devices.
PWR This port connects to a live power source using the
supplied power cube.