Xantrex Technology XW POWER SYSTEM XW4024-120/240-60 - Manual (Page 107)

The XW Automatic Generator Start
975-0239-01-01 5–15
Connecting an External ON/OFF LED
Wires 9 (White/Blue) and 11 (Black) on the wiring harness can be connected to an LED or
other light to accompany a remote external ON/OFF switch. This light turns on when the
generator run signal is active to visually indicate that the generator is running.
Important: With some generators, the generator run signal becomes active
during the preheat stage, before the generator is actually running. In this case, the
external ON/OFF LED (and the Generator On light on the XW Automatic
Generator Start) will turn on during the preheat stage and remain on when the
generator is running.
For some generators, these lights will also remain on for a period of time after the
generator has stopped.
Figure 5-10 External On/Off Switch and LED Wiring Diagram
START PUSH BUTTON
STOP PUSH BUTTON
12V OR 24V
EXTERNAL LED
EXTERNAL LED
GROUND
7
8
9
10
11
13
2K
2K
5K11
XW Automatic Generator Start