Yamaha RX-V3800 - Manual (Page 72)

68
En
Using Network/USB features
Use this feature to enjoy WAV (PCM format only), MP3
and WMA files saved on your USB memory device or
USB portable audio player connected to the USB port on
the front panel of this unit.
• This unit supports USB mass storage class devices (except USB
Hard Disc Drivers) using FAT 16 or FAT 32.
• Only the first partition is displayed in the GUI menu. You
cannot select files in other partitions.
• Up to 8 levels of directory hierarchy and 500 music files per
directory are recognized.
• Some devices may not work properly even if they meet the
requirements.
• Some WAV, MP3 and WMA files may not be playable or may
be noisy when played.
• When you connect your USB memory device or USB portable
audio player, there may be an about 10 seconds delay.
y
• While a song is being played, the time elapsed is displayed at
the bottom of the playback information screen.
• You can use 7b / a to skip backward/forward and
7h / s to start/stop playback independently from the menu
in the OSD.
• You can set the settings for repeat and shuffle mode by using the
“Play Style” parameters in “NET/USB” (see page 95).
• You can set the front panel display mode by using the “Scroll”
parameter in “Front Panel Disp.” (see page 96).
■ Connecting a USB memory device or a
USB potable audio player
Connect a USB jack of a USB memory device or
USB portable audio player to the USB port on the
front panel of this unit.
Use this feature to access the desired music sources (WAV,
MP3 and WMA files on the connected PC, MCX-2000 or
USB storage devices and Internet Radio stations) directly.
You can preset 8 items in each sub input sources.
■ Assigning the items to the numeric
button (1-8)
1
Press 1
NET/USB to select “NET/USB” as
the input source.
2
Select a desired music source you want to
assign to the numeric button (1-8) (6), and
then play back the source.
See page 65 for details.
3
Press 5
MEMORY.
This unit in the memory preset mode. The MEMORY
indicator flashes and following message appears in
the video monitor and front panel display.
y
When you do not complete each of the following steps within 10
seconds, the memory preset mode is automatically canceled. In
this case, start over from step 3.
Using a USB memory device or a
USB portable audio player
Notes
SLEEP
S
USB
USB memory device or USB
portable audio player
Using shortcut buttons
Before performing the following operations, set the operation
mode selector on the remote control to DSOURCE.
MEMORY
CD-R CD PHONO MULTI CH TUNER XM MD/TAPE BD/HD DVD DVD NET/USB DVR DTV/CBL VCR V-AUX
- : P C / M C X
Flashes Preset number