Yamaha RX-V3800 - Manual (Page 116)

112
En
Remote control features
■ Default macro functions
*1 You can turn on some components (including Yamaha components) connected to this unit by connecting them to the AC
OUTLET(S) on the rear panel of this unit. Power control may not be synchronized with this unit depending on the component. For
details, refer to the operating instructions for the connected component.
*2 When the remote control code for your TV is set up for either DTV/CBL or PHONO (see page 107), you can turn on the power of
your TV without selecting an input source. The remote control code set up for DTV takes priority over the one for PHONO.
*3 When TUNER is selected as the input source, this unit plays the last station received before the unit was set in the standby mode.
*4 Playback can be started for any Yamaha remote control-compatible MD recorder, CD player, CD recorder, DVD player, Blu-ray
Disc player, HD DVD player or DVD recorder. When using macros to operate other components, you will need to program the play
button on the input area of that component (see page 109) or set a remote control code (see page 107) in advance.
Pressing macro
button
To automatically transmit these signals in order
First Second Third
— —
—
—
—
(*1)
—
(CD area) (*4)
(CD-R area) (*4)
—
(MD/TAPE area) (*4)
(DVD area) (*4)
(BD/HD DVD area) (*4)
—
—
(DVR area) (*4)
(VCR area) (*4)
—
STANDBY STANDBY
POWER POWER (*1)
TV
POWER
(*2)
XM POWER XM
NET/USB POWER NET/USB
TUNER
POWER
TUNER
(*3)
CD CD
CD-R CD-R
MULTI CH IN MULTI CH IN
MD/TAPE MD/TAPE
DVD DVD
BD/HD DVD BD/HD DVD
PHONO PHONO
DTV/CBL DTV/CBL
DVR DVR
VCR VCR
V-AUX/DOCK V-AUX/DOCK