Yamaha RX-V3800 - Manual (Page 139)

135
En
Troubleshooting
AD
DITIONAL
INFO
RMA
T
ION
English
■ iPod
In case of a transmission error without a status message appearing in the front panel and on the video monitor, check the connection to
your iPod (see page 30).
■ Auto Setup
Before Auto Setup
Note
Status message Cause Remedy
See
page
Loading... This unit is in the middle of recognizing
the connection with your iPod.
This unit is in the middle of acquiring
song lists from your iPod.
Connect error There is a problem with the signal path
from your iPod to this unit. Turn off this unit and reconnect the Yamaha iPod
universal dock to the DOCK terminal of this unit. 30
Try resetting your iPod. —
Unknown iPod The iPod being used is not supported by
this unit. Only iPod (Click and Wheel), iPod nano, and iPod
mini are supported. —
iPod connected Your iPod is properly stationed in a
Yamaha iPod universal dock (such as the
YDS-10, sold separately) connected to the
DOCK terminal of this unit, and the
connection between your iPod and this
unit is complete.
Disconnected Your iPod was removed from a Yamaha
iPod universal dock (such as YDS-10 sold
separately) connected to the DOCK
terminal of this unit. Station your iPod back in a Yamaha iPod universal
dock (such as YDS-10 sold separately) connected to
the DOCK terminal of this unit. 30
Unable to play This unit cannot play back the songs
currently stored on your iPod. Check that the songs currently stored on your iPod
are playable. —
Store some other playable music files on your iPod. —
Error message Cause Remedy
See
page
Connect MIC! Optimizer microphone is not connected. Connect the supplied optimizer microphone
to the OPTIMIZER MIC jack on the front
panel. 37
Unplug Phones! Headphones are connected. Unplug the headphones. —
No Setup Menu! All setup menu are set to “Skip”. Set the desired menu item to “Check”. 39
Memory Guard! “Memory Guard” is set to “On”. Set “Memory Guard” to “Off”. 98