Yamaha RX-V3800 - Manual (Page 113)

109
En
Remote control features
AD
V
ANCED
OPERA
T
ION
English
You can program remote control codes from other remote
controls. Use the learn feature if you want to program
functions not included in the basic operations covered by
the remote control codes, or an appropriate remote control
code is not available. You can program the function of
other remote control to the buttons in the highlighted areas
in the following illustration. The buttons can be
programmed independently for each input area.
The remote control transmits infrared rays. If the other remote
control also uses infrared rays, this remote control can learn most
of its functions. However, you may not be able to program some
special signals or extremely long transmissions. Refer to the
operating instructions for the other remote control.
1
Set the operation mode selector to
D
SOURCE and then press an input selector
button (1) to select an input area.
Make sure that the operation mode selector is set to DSOURCE.
When you set the operation mode selector to DAMP and
program a remote control codes from other remote controls, the
programmed key cannot operate the amplifier function of this
unit.
2
Place this remote control about 5 to 10 cm
(2 to 4 in) apart from the other remote control
on a flat surface so that their infrared
transmitters are aimed at each other.
3
Press M
LEARN using a ballpoint pen or
similar object.
“LEARN” and the name of the selected input area
(ex. “DVD”) appear alternately in the display window
(B) on the remote control.
• Do not press and hold MLEARN. If you hold it down for
more than 3 seconds, the remote enters the remote control
code setting mode.
• If you do not complete each of the following steps within
30 seconds, the learning mode will be automatically
canceled. In this case, start over from step 3.
4
Press the button for which you want to
program the new function.
“LEARN” appears in the display window (B) on the
remote control.
Programming codes from other
remote controls
Note
Note
VOLUME
SRCH MODE
PURE DIRECT PRESET/CH SET MENU
BAND
LEVEL
TV
SOURCE
AMP
SELECT
TUNER
MD/TAPE DVD BD/HD DVD PHONO
DTV/CBL DVR VCR
CD CD-R MULTI CH IN
V-AUX/DOCK
SLEEP AUDIO SEL
POWER STANDBY
XM NET/USB
+
–
MENU TITLE
MUTE
CH TV VOL
POWER POWER
–
+
–
+
TV MUTE TV INPUT
AV TV
ON OFF CLEAR LEARN RENAME MACRO
REC
NET RADIO USB
PC/MCX
EFFECT
STRAIGHT
A-E/CAT.
SRCH MODE
PURE DIRECT PRESET/CH SET MENU
BAND
LEVEL
CLASSICAL LIVE/CLUB ENTERTAIN MOVIE
STEREO ENHANCER SUR. DECODE 3D DSP
2
ENTER
MENU TITLE
MUTE
4 3
ENT + 10 0 9
5
1
7 6 8
SYSTEM MEMORY
MEMORY
DISPLAY
AUDIO
TV MUTE TV INPUT
RETURN
Set to
SOURCE
TUNER
MD/TAPE DVD BD/HD DVD PHONO
DTV/CBL DVR VCR
CD CD-R MULTI CH IN
V-AUX/DOCK
XM NET/USB
TV
SOURCE
AMP
Notes
SELECT
TUNER MD/T
APE
D VD
BD/HD D
V D
PHONO
DTV/CBL
D V R
VCR
CD
CD-R
MUL
TI CH IN
V- A UX/DOCK SLEEP
A UDIO SEL
PO
WER
ST ANDBY
XM
NET/USB
PO
WER
PO
WER AV
TV
5 to 10 cm (2 to 4 in)
Other remote control
LEARN