Yamaha RX-V3800 - Manual (Page 61)

57
En
XM™ Satellite Radio tuning
BA
S
IC
OPERA
T
ION
English
■ Checking your XM Radio ID
Once you have installed the XM Mini-Tuner Home Dock,
inserted the XM Mini-Tuner, connected the Home Dock to
your XM Ready home audio system, and installed the
antenna, you are ready to subscribe and begin receiving
XM programming. There are three places to find your
eight character XM Radio ID: on the XM Mini-Tuner, on
the XM Mini-Tuner package, and on XM Channel 0 (see
page 58). Record the Radio ID in the following eight
squares for reference.
The XM Radio ID does not use the letters “I”, “O”, “S” or “F”.
■ Subscription of your XM Satellite Radio
service
For U.S. customers
URL: http://www.xmradio.com/
Phone: 1-800-XM-RADIO (1-800-967-2346)
For Canadian customers
URL: http://www.xmradio.ca/
Phone (XM’s Listener Care):
1-877-GET-XMSR (1-877-438-9677)
You will need a major credit card. XM will send a signal from the
satellites to activate the full channel lineup. Activation normally
takes 10 to 15 minutes, but during peak busy periods you may
need to keep your XM Ready home audio system on for up to an
hour. When you can access the full channel lineup on your XM
Ready home audio system you are done.
1
Rotate the C
INPUT selector (or press
1 XM) to select “XM” as the input source.
The cursor on the left of the XM indicator lights up in
the front panel display and the XM Satellite Radio
information (such as channel number, channel name,
category, artist name, or song title) for the currently
selected channel appears in the front panel display.
y
When you select “XM” as the input source, this unit
automatically recalls the previously selected channel.
The XM Satellite Radio signals cannot be output at the
AUDIO OUT (REC) jacks.
2
Search for a channel by using one of the XM
Satellite Radio search modes.
• To select a channel from the all channel list, see
“All Channel Search mode” on page 58.
• To select a channel by category, see “Category
Search mode” on page 58.
• To select a channel from the preset channels, see
“Preset Search mode” on page 58.
• To select the desired channel directly by entering
the channel number, see “Direct Number Access
mode” on page 58.
y
• You can use the Neural-THX Surround decoder to enjoy
the XM HD surround sound content of the XM Satellite
Radio broadcasts in multi-channels (see page 72).
• You can set the XM Satellite Radio preset channels (see
page 59).
• You can display the XM Satellite Radio information in the
front panel display or in the OSD (see page 60).
Activating XM™ Satellite Radio
Note
Note
Basic XM™ Satellite Radio
operations
Before performing the following operations, set the operation
mode selector on the remote control to DSOURCE.
Note
CD-R CD PHONO MULTI CH TUNER XM MD/TAPE BD/HD DVD DVD NET/USB DVR DTV/CBL VCR V-AUX
[ 0 0 1 ] P r e v i e w
Lights up