ZyXEL Communications P-660H-Tx v2 - Manual (Page 179)

Chapter 14 Remote Management Configuration
P-660H-Tx v2 User’s Guide
179
Follow the procedure below to configure your ZyXEL Device to be managed by CNM Access.
See the Command Interpreter appendix for information on the command structure and how to
access the CLI (Command Line Interface) on the ZyXEL Device.
"
In this example a.b.c.d is the IP address of CNM Access. You must change
this value to reflect your actual management server IP address or domain
name. See
Table 69 on page 179 for detailed descriptions of the commands.
Figure 95 Enabling TR-069
The following table gives a description of TR-069 commands.
ras> wan tr069 load
ras> wan tr069 acsUrl a.b.c.d
Auto-Configuration Server URL: http://a.b.c.d
ras> wan tr069 periodicEnable 1
ras> wan tr069 informInterval 2400
TR069 Informinterval 2400
ras> wan tr069 active 1
ras> wan tr069 save
Table 69 TR-069 Commands
ROOT
COMMAND OR
SUBDIRECTO
RY
COMMAND DESCRIPTION
wan tr069 All TR-069 related commands must be preceded by wan tr069.
load Start configuring TR-069 on your ZyXEL Device.
active [0:no/
1:yes] Enable/disable TR-069 operation.
acsUrl Set the IP address or domain name of CNM Access.
username
[maxlength:15] Username used to authenticate the device when making a
connection to CNM Access. This username is set up on the server
and must be provided by the CNM Access administrator.
password
[maxlength:15] Password used to authenticate the device when making a
connection to CNM Access. This password is set up on the server
and must be provided by the CNM Access administrator.
periodicEnable
[0:Disable/
1:Enable] Whether or not the device must periodically send information to
CNM Access. It is recommended to set this value to 1 in order for
the ZyXEL Device to send information to CNM Access.
informInterval
[sec] The duration in seconds of the interval for which the device MUST
attempt to connect with CNM Access to send information and
check for configuration updates. Enter a value between 30 and
2147483647 seconds.
save Save the TR-069 settings to your ZyXEL Device.