Zoom 4410B - Manual (Page 21)

2
Accept the default Authentication Mode: TKIP (Temporal
Key Integrity Protocol).
3
In the IEEE 802.1X Authentication area, note that the
check box marked Enable IEEE 802.1X authentication for
this network is selected. With IEEE 802.1X authentication,
each wireless device (client) sends a signal to the wireless
access point, which in turn sends the signal to the RADIUS
server. The server determines whether or not the client is
allowed to join the network.
4
Click the EAP (Extensible Authentication Protocol) Type
drop-down list and select an authentication protocol:
21 Chapter 2: Setting Security