Zoom 4410B User Manual
Page 19
1
In the Privacy Configuration window, click the
Authentication Mode drop-down arrow and select WPA2.
2
At Encryption Mode, accept the default AES (Advanced
Encryption Standard)
3
In the IEEE 802.1X Authentication area, note that the check
box marked Enable IEEE 802.1X authentication for this
network is selected. With IEEE 802.1X authentication, each
wireless device (client) sends a signal to the wireless access
point, which in turn sends the signal to the RADIUS server.
The server determines whether or not the client is allowed to
join the network.
4
Click the EAP (Extensible Authentication Protocol) Type
drop-down list and select an authentication protocol:
• PEAP (Protected Extensible Authentication Protocol).
This is the default. With PEAP, you can select from two
authentication extensions:
MS-CHAPV2. Microsoft’s version of CHAP
(Challenge-Handshake Authentication Protocol
(default)
GTC
• TLS (Transport Layer Security). There are no
authentication extension options with TLS.
19
Chapter 2: Setting Security