ZyXEL Communications HomePlug AV DMA-1100P - Manual (Page 99)

Appendix A Product Specifications
DMA-1100P User’s Guide
99
Supported Content Formats and Codecs
The following describes the details about the files that the DMA can play. Files with
specifications lower or higher than the listed ranges may not play or may not play properly.
For the media server software included on the CD, refer to the help (Start > All Programs >
DigiOn > Help) for a list of file formats that the media server software can play.
Video File Formats Supported
USB 2.0 USB (Universal Serial Bus) version 2.0 allows for interfacing devices with
data transfers rates of up to 480 Mbps.
HomePlug AV The HomePlug AV standard specifies how network devices communicate
using standard electrical wiring.
It supports a data transfer rate of up to 200Mbps.
Data is encrypted using 128-bit AES (Advanced Encryption Standard).
HomePlug AV compatible devices co-exist with HomePlug 1.0 devices but
do not detect each other.
The range of a HomePlug AV network is 300 meters/984 feet in optimal
conditions.
HomePlug AV is compatible with all OSs.
The maximum number of powerline devices on a single network is 64.
Windows Media Digital
Rights Management
(DRM) This Windows standard restricts the playback of protected media to
computers holding a license key for the media file.
Table 24 Standards Supported (continued)
STANDARD DESCRIPTION
Table 25 MPEG PS Video File Specifications
Extensions mpg
mpeg
mpe
m2p
Video Stream MPEG-1, MPEG-2
Profile Level: up to MP@HL
Resolution: Maximum 1920 x 1080
Bit rate: VBR/CBR, Maximum 15 Mbps
Audio Stream MPEG-1/2 Layer-II
Sample Frequency: Maximum 48 kHz
Channels: Maximum 2 Channels
Bit rate: VBR/CBR, Maximum 384 kbps
LPCM
Sample Frequency: Maximum 48 kHz
Bits per sample: Maximum 16 bit
Channels: Maximum 2 Channels
AC3
Sample Frequency: Maximum 48 kHz
Channels: Maximum 6 Channels
Bit rate: Maximum 640 kbps