ZyXEL Communications HomePlug AV DMA-1100P - Manual (Page 75)

Chapter 10 Configuring the DMA
DMA-1100P User’s Guide
75
10.10 Settings For Ease of Use
Use this menu to configure settings that control the DMA’s operation.
Select OPTION > Settings for Ease of Use to open the following menu.
Figure 46 OPTION > Settings for Ease of Use
The following table describes the fields in this menu.
10.11 Reset Settings
Use this menu to set the DMA back to the factory default settings.
Table 18 OPTION > Settings for Ease of Use
LABEL DESCRIPTION
Connect to last
accessed server
automatically When the DMA starts up, this option has it automatically connect to the media
server that you last used.
A check mark appears next to the option if it is selected.
Connect to single
server/USB
automatically When the DMA starts up, this option has it automatically connect to the media
server or USB device that you last used.
A check mark appears next to the option if it is selected.
Resume last
screen from
standby If you were playing a file when you turned off the DMA, this option has the DMA
automatically continue playback from where you left off when you turn the DMA
back on.
A check mark appears next to the option if it is selected.
Sound effect Set how loud you want the DMA to beep when you press buttons on the remote
control.
OK Select this to save your changes back to the DMA.
CANCEL Select this to exit this screen without saving your changes.