ZyXEL Communications HomePlug AV DMA-1100P - Manual (Page 85)

Chapter 12 The ENCRYPT Button
DMA-1100P User’s Guide
85
12.3 Setting Up Multiple Networks
You can use the ENCRYPT button to set up multiple powerline networks using your existing
powerline network.
For example, you have already set up a powerline network in your home (A) which accesses a
printer (B). Now you want a separate powerline network connection from your laptop to your
printer (C).
Figure 54 One Existing Powerline Network
1 Click the ENCRYPT button on (A) for more than 10 seconds until the HomePlug ( )
turns off. This disconnects (A) from (B).
2 Click the ENCRYPT button on (A) and (C) for 1~2 seconds and within two minutes of
each other.
3 Wait for roughly one minute while (A) and (C) connect.
4 Check the LEDs on both (A) and (C). When the HomePlug (
) lights shine steadily,
the devices are connected.
Figure 55 Two Separate Powerline Networks
A
B
C
A
C
B