ZyXEL Communications HomePlug AV DMA-1100P - Manual (Page 72)

Chapter 10 Configuring the DMA
DMA-1100P User’s Guide
72
10.8 Audio Settings
"
The DMA only provides 2 channel (stereo) output. When the DMA plays 5.1
channel files, it downmixes the analog or digital input and provides 2 channel
(stereo) analog or digital output.
Use this menu to configure the DMA’s audio output for music playback. You can turn the S/
PDIF connector’s output (the DMA’s digital output) on or off for individual audio formats.
The analog output is always on. You can also select how much volume smoothing you want
during audio file playback.
See Section 10.8.1 on page 73 for details on the individual audio formats.
Select OPTION > Audio Output Settings to open the following menu.
Figure 44 OPTION > Audio Output Settings
The following table describes the fields in this menu.
Table 16 OPTION > Audio Output Settings
LABEL DESCRIPTION
Analog Output The DMA sends two channel (also called left and right or stereo) audio output
through the LEFT and RIGHT audio connectors for music files.
S/PDIF Output Use this column to turn the S/PDIF connector’s output (the DMA’s digital output) on
or off for individual audio formats.
AAC Select whether or not the DMA sends digital audio output through the S/PDIF audio
connector for AAC music files.
Select LPCM to turn on the channel digital output (also called left and right or
stereo) for AAC music files.
Select OFF to turn off the digital output for AAC music files.