ZyXEL Communications HomePlug AV DMA-1100P - Manual (Page 71)

Chapter 10 Configuring the DMA
DMA-1100P User’s Guide
71
10.6 Video Modes
The DMA supports 480i, 480p, 720p and 1080i video modes. 720p and 1080i are high
definition television modes. 480i is used with most standard definition televisions. The
number (“1080” for instance) stands for the number of lines of vertical resolution. The letter
“i” stands for interlaced scan. The letter “p” stands for progressive scan. Progressive scan
provides higher picture quality than interlaced but requires twice the bandwidth.
10.7 TV Settings
Use this menu to configure the video output that the DMA sends to your television.
Select OPTION > TV Settings to open the following menu.
Figure 43 OPTION > TV Settings
The following table describes the fields in this menu.
Table 15 OPTION > TV Settings
LABEL DESCRIPTION
Output Type Select Digital if your television accepts digital input.
Select Analog if your television only accepts analog input.
Screen Size Select 16:9 if your television supports the 16:9 format (widescreen).
Select 4:3 if your television supports the 4:3 format (traditional television).
Resolution Select a video mode. Use the highest number that your television supports.
Select from 480i, 480p, 720p and 1080i.
You can also select Auto when the Output Type is set to Digital.
OK Select this to save your changes back to the DMA.
CANCEL Select this to exit this screen without saving your changes.