Xerox X2 - Manual (Page 27)

250g/m 2 Banner Fabric – Fire Retardant 16
Description
Tear resistant polyester fabric designed for fine image quality in either 360 or 720 dpi print mode, for
use indoors or outdoors against a flat surface without lamination. This fabric has a fire retardant
coating and is certified M2 flame retardant for use in fire sensitive indoor spaces. A functional fabric
that can be "finished" to become a vast array of graphics.
Applications
Ideal for indoor and outdoor banner applications, e.g., art galleries, retail and event promotions, long
hallways, showrooms, supermarkets, ceiling displays, museums, theatre lobbies, entranceways,
petrol stations, car park advertising, backdrops, signage, and tradeshows.
Physical Characteristics
Base Weight 250 g/m
2
Total Calliper 260 microns
Indoor Unlaminated
Outdoor Unlaminated
<0.5%
Temperature stability
Dimensional stability -10deg C to +60 deg C
Fire Rating NF P 92-503 - Class M2, DIN-4102 - Class B1
Durability
Tensile strength
Tearing resistance >1000 N/5cm warp, >800 N/5cm weft
>70 N warp, >70N weft
2 years
1 year
Dimensions
Code Length
023R02002 54” 1372mm 25m
023R02004 42" 1067mm 25m
023R02005 36” 914mm 25m
Width
Compatibility
Xerox X2
Xerox Xpress
Seiko IP4XXX
Operating Instructions
• Store in a cool, dry environment, free from direct sunlight, within temperatures of 10-35 o C and
non-condensing relative humidity of 30-70%. Store the product in its original carton and
wrapper to protect from dust and moisture. Shelf life is 2 years if kept in original packaging.
• Ensure that roll ends are protected and that the edges of the media are not damaged. If the
media edges are not flat this can result in damage to the printer.
• Keep the image surface dry and free of grease, oil, silicones and dirt.
• Use within the temperature range 18-30˚C and relative humidity of 40-60%.
• Avoid over-saturating with ink for such as CMY / CMYK black. Reduce individual and overall ink
limits (<220%) to improve drying and production speed. Too much ink may cause light "oil-
spots" to appear. Working at lower ink limits improves image weather resistance.
• Some banding may be evident close viewed but from the likely viewing distance for banner
graphics it should be invisible. Unidirectional printing can help reduce banding.
• This is a heavily coated, extremely thick material. It may be easier to run this media from the
back roller and the automatic cutter should not be used during media loading or print production.
• Do not fold images. Use "slip sheets" to prevent image offset from one print to another.
• Over-lamination is not required.
www.xerox.com/iccprofiles.com
27