Xerox X2 - Manual (Page 19)

120g/m 2 Outdoor Blue Back Poster Paper 8
Description
This matt white water-resistant poster paper is inherently opaque but has a blue back to reinforce
the highest possible opacity to meet the requirements of billboard poster applications as is the case
with traditional screen print papers for this application. It is suitable for a wide range of indoor
graphic applications too, but is primarily designed for outdoor use without lamination. Wet strength
is suitable for soaking as part of the bill posting process. High ink capacity allows bright prints with
excellent colour density and gamut. Tested and approved by the Swiss billboard association APG and
other authorities. Compatible with commonly used adhesives, application practices and Northern
European weathering to meet the needs of billboard advertising specifiers such as Viacom.
Applications
Excellent for all single or multi panelled billboard applications: Bus shelters, subway
advertisements, sporting event signage and promotions, outdoor festival signs and displays, outdoor
markets, construction signs, indoor presentation applications. Also excellent as a low cost backlit
display for such applications as bus shelter advertising.
Physical Characteristics
Base Weight 120 g/m
2
Calliper 155 microns
Opacity 98%
Brightness 100
Durability
1 year Indoor Unlaminated
Outdoor Unlaminated 6 months
Dimensions
Code Length
023R01420 54” 1372mm 76m
023R01429 50” 1270mm 76m
023R01614 42” 1067mm 76m
023R01421 36” 914mm 76m
Width
Compatibility
Xerox X2
Xerox Xpress
Seiko IP4XXX
Operating Instructions
• Store in a cool, dry environment, out of direct sunlight, within temperatures of 10-35 o C and non-condensing
relative humidity of 30-70%. Store rolls in original carton and wrapper to protect from dust and moisture.
Shelf life is 2 years if kept in original packaging as specified.
• Ensure that roll ends are protected and that edges of the media are not damaged. If the media edges are
not flat this can result in damage to the printer.
• Use within the temperature range 18-30˚C and relative humidity of 40-60%.
• Wet paper at least 8 hours prior to pasting. Longer soaking has no negative impact on the paper’s strength.
Ensure appropriate microbiological precautions.
• This paper may expand up to 2.5% when wet. If intended installation requires exact size consider imaging
the design approximately 98% to compensate for possible expansion.
• Let the graphic dry for at least 24 hours prior to soaking and installation.
• This is a same day paste and post product. Let soak in water for 1 hour prior to pasting to minimise wrinkles
during installation. Can be soaked in water for up to 48 hours prior to use.
• Do not use anti-freeze during billboard installation as ink adhesion may be lost.
• Recommended Pastes:
Zellura UST
Natural Paste (Fish Paste: K. Blattman, potato starch: AVEBE)
Tylose C 6000, Planatol & Chimcoll (contains biocide, difficult to dissolve)
• Lamination is not required and this paper may not adhere well to some laminate films.
www.xerox.com/iccprofiles.com
19