Xerox X2 - Manual (Page 20)

120g/m 2 Short-term Outdoor Blue Back Paper 9
Description
This water-resistant poster paper has its opacity reinforced with a blue back to meet the
requirements of billboard poster applications, as is the case with traditional screen print papers for
this application. It is suitable for a wide range of indoor graphic applications too, but is primarily
designed for outdoor use without lamination and is suitable for soaking as part of the bill posting
process. Tested with authorities for compatibility with the various adhesives, application practices
and Northern European weathering, meet the requirements of billboard advertising and standard
specifiers such as Viacom for most outdoor campaigns.
Applications
Excellent for all single or multi panelled billboard applications: Bus shelters, subway advertisements,
sporting event signage and promotions, outdoor festival signs and displays, outdoor markets,
construction signs, indoor presentation applications. Also excellent as a low cost backlit display for
such applications as bus shelter advertising.
Physical Characteristics
Base Weight
120 g/m
2
Calliper 150 microns
Opacity 97%
Brightness 95
Durability
1 year Indoor Unlaminated
Outdoor Unlaminated 4 months
Dimensions
Code Length
023R02180 54” 1372mm 80m
023R02181 50” 1270mm 80m
023R02182 42” 1067mm 80m
023R02183 36” 914mm 80m
Width
Compatibility
Xerox X2
Xerox Xpress
Seiko IP4XXX
Operating Instructions
• Store in a cool, dry environment, out of direct sunlight, within temperatures of 10-35 o C and non-condensing
relative humidity of 30-70%. Store rolls in original carton and wrapper to protect from dust and moisture.
Shelf life is 2 years if kept in original packaging as specified.
• Ensure that roll ends are protected and that edges of the media are not damaged. If the media edges are
not flat this can result in damage to the printer.
• Use within the temperature range 18-30˚C and relative humidity of 40-60%.
• Wet paper at least 8 hours prior to pasting. Longer soaking has no negative impact on the paper’s strength.
Ensure appropriate microbiological precautions.
• This paper may expand up to 3% when wet. If intended installation requires exact size consider imaging the
design approximately 98% to compensate for possible expansion.
• Let the graphic dry for at least 24 hours prior to soaking and installation.
• This is a same day paste and post product. Let soak in water for 1 hour prior to pasting to minimise wrinkles
during installation. Can be soaked in water for up to 48 hours prior to use.
• Do not use anti-freeze during billboard installation as ink adhesion may be lost.
• Recommended Pastes:
-
Zellura UST
-
Natural Paste (Fish Paste: K. Blattman, potato starch: AVEBE)
-
Tylose C 6000, Planatol & Chimcoll (contains biocide, difficult to dissolve)
• Lamination is not required and this paper may not adhere well to some laminate films.
www.xerox.com/iccprofiles.com
20