Xerox X2 User Manual
Page 16
115g/m
2
Presentation Paper
5
Description
A premium quality, all-purpose paper with a smooth matt print surface and extra features for high-
volume 360dpi presentation printing. The front side coating is high-white and has higher ink
capacity to enable stronger colour reproduction. The rear of this paper is coated with a barrier to
prevent ghosting from one image to another. Suitable for thermal laminates. Use for all
presentation applications.
Applications
Good for all presentation graphics such as posters, courtroom graphics, corporate presentations,
point of sale graphics, framed images, trade show graphics, museum signage, in-house graphics,
merchandising materials, mounted prints, exhibit graphics, promotional displays, corporate graphics,
mural panels, media decals, backlit displays, laminated prints, fine art reproductions, photo-realistic
imaging, proofs, directional display and map reproductions.
Physical Characteristics
Base Weight
115 g/m
2
Indoor Laminated
5 years
Calliper
146 microns
Indoor Unlaminated
6 months
Opacity
94%
Outdoor Laminated
2 years
Brightness
107
Outdoor Unlaminated
Not recommended
Durability
Dimensions
Code
Length
023R01627
54”
1372mm
76m
023R01628
50”
1270mm
76m
023R01629
42”
1067mm
76m
023R01630
36”
914mm
76m
Width
Compatibility
Xerox X2
Xerox Xpress
Seiko IP4XXX
Operating Instructions
• Store in a cool, dry environment, free from direct sunlight, within temperatures of 10-35
o
C and
non-condensing relative humidity of 30-70%. Store the product in its original carton and
wrapper to protect from dust and moisture.
• Ensure that roll ends are protected and that the edges of the media are not damaged. If the
media edges are not flat this can result in damage to the printer.
• Keep the image surface dry and free of grease, oil, silicones and dirt. It is recommended that
cotton gloves be used for handling to avoid fingerprints.
• Shelf life of this material is 2 years if kept in original packaging as specified.
• Use within the temperature range 18-30˚C and relative humidity of 40-60%.
• Print in 360dpi print mode only.
• Laminate only with hot melt laminates if satin or gloss finishes are required, or if protection from
UV, moisture or abrasion is necessary for extra durability.
• The fine structure of this paper can cause laminated graphics to split if subject to frequent flexing
such as with some pop-up exhibition display systems.
www.xerox.com/iccprofiles.com
16