Xerox X2 - Manual (Page 13)

90g/m 2 Coated Design Paper 2
Description
A 90 g/m 2 medium grade, bright white paper with an ink receiver coating which meets the line width
specifications for GIS/CAD and Engineering applications, is ideal for detailed mapping and colour
presentation and will provide good graphic image quality. Available in the full range of ISO sizes
from A0 to A4.
Applications
Good for all high quality technical drawings including highly detailed images and presentation grade
prints, as well as mapping, signage, corporate graphics and charts, promotional displays, full graphic
posters. Can be used unfinished or laminated for extra durability.
Physical Characteristics
Base Weight 92 g/m 2
Calliper 115 microns
Opacity 94%
Brightness 115
Dimensions
Code Length
023R01443 A0 841mm 100m
023R01444 A1 594mm 100m
Width
Compatibility
Xerox X2
Xerox Xpress
Seiko IP4XXX
Operating Instructions
• Store in a cool, dry environment, free from direct sunlight, within temperatures of 10-35 o C and
non-condensing relative humidity of 30-70%. Store the product in its original carton and
wrapper to protect from dust and moisture.
• Ensure that roll ends are protected and that the edge of these media are not damaged. If the
media edges are not flat this can result in damage to the printer.
• Keep the image surface dry and free of grease, oil, silicones and dirt. It is recommended that
cotton gloves be used for handling to avoid fingerprints.
• The printing environment should be kept near optimal conditions while using this material 21˚C &
50% R.H.). An increase in humidity or temperature can cause printing malfunctions. Head
crashes and carriage jams may occur if used outside of these conditions.
• Shelf life of this material is 2 years if kept in original packaging as specified.
• Folding or creasing prints can result in some loss of image.
• Laminate with thermal laminates if longer durability is required.
www.xerox.com/iccprofiles.com
13