Zebra Technologies S400 - Manual (Page 9)

Zebra S400 & S600 User’s Guide 1
›ÏßcØYϋŸ›
Congratulations! You have just purchased a high-quality thermal label
printer manufactured by the industry leader in quality, service, and value.
For over 25 years, Zebra Technologies Corporation has provided
customers with the highest caliber of products and support.
This user’s guide provides all the information you need to operate the
printer on a daily basis.
• ZPL II
®
is Zebra Technologies Corporation’s Zebra Programming
Language II label design language. ZPL II lets you create a wide variety
of labels from the simple to the very complex, including text, bar codes,
and graphics. To create and print label formats, refer to the ZPL II
Programming Guide (part #46469L). If one was not ordered with your
printer, simply call your distributor or Zebra Technologies Corporation.
• In addition, label preparation software is available. Contact your
distributor or Zebra Technologies Corporation for further information.
Or, visit our web site at www.zebra.com for a free demo copy.
• The S400/S600 Maintenance Manual (part #44895L) contains all the
information you need to maintain your printer. To order, contact your
distributor or Zebra Technologies Corporation.
8QSDFNLQJ
Save the carton and all packing materials in case reshipping is required.
• Inspect the printer for possible shipping damage.
• Check all exterior surfaces for damage.
• Raise the media access cover (refer to Figure 4 on page 5) and inspect
the media compartment for damage.