Zebra Technologies S400 - Manual (Page 12)

4 Zebra S400 & S600 User’s Guide
In Figure 2, the printer
is shown in Peel-Off
mode. In Peel-Off,
backing material is
peeled away from the
label as it is printed.
After this label is
removed from the
printer, the next one is
printed.
To load media in
Peel-Off mode, see
page 11.
Figure 3 shows a
printer that is
equipped for Cutter
mode. When in cutter
mode, the printer
automatically cuts the
label after it is printed.
Then, the cutter catch
tray “catches” the
label.
To load the media in
Cutter mode, see
page 14.
Figure 2. Peel-Off Mode
Figure 3. Cutter Mode