Xerox DOCUCOLOR 12 - Manual (Page 54)

GETTING TO KNOW YOUR DOCUCOLOR 12 2–20 DOCUCOLOR 12 USER GUIDE
2
3
4
5
6
7
2
White border edges on copies
All copies made on the DocuColor 12 have white
border edges on four sides of the copy, as
illustrated in Figure 17. There is a factory setting
which removes 2 mm from the left, right, top and
bottom edges of the scanned original. This
factory setting cannot be altered.
If the white border edges result in image loss on
your copies, select the Copy All (93% reduction)
option in the Reduce/Enlarge feature to minimize
the image loss. You may also use the Auto
Center feature to ensure the original is centered
on the copy.
Refer to the Edge Erase feature in the “Added
Features” chapter for more information about
edge erase.
Figure 17: Copy with white border edges