Xerox DOCUCOLOR 12 - Manual (Page 170)

OUTPUT FORMATS 7–14 DOCUCOLOR 12 USER GUIDE
2
3
4
5
6
7 7
Covers
This feature allows you to add covers to your
copied sets, using stock drawn from a different
tray than your copies. You can have 1-sided or 2-
sided front or front and back covers, with or
without an image.
KEY POINT: You must have an original page for
each page you wish to print in your copy job.
If you create 1-sided covers with images, the
machine uses the first image and last image of
your original set as the cover images.
When using 2-sided covers, the first two images of
your original set will create the front cover and the
last two images will create the back cover. If you
require an inside front or back cover that is blank,
be sure to insert a blank original page into the set
of originals.
The paper size and orientation must be the same
for the whole job.
KEY POINT: You must have a Sorter to have the
Covers feature available.