Xerox DOCUCOLOR 12 - Manual (Page 124)

ADDED FEATURES 5–26 DOCUCOLOR 12 USER GUIDE
2
3
4
5
6
7
5
No Erase
The Edge Erase default setting is No Erase, which
enables the copies to print within 2 mm of each
page edge. This is normally sufficient to remove
shadows from the copy edges.
1 Touch the Edge Erase icon on the Added
Features tab to display the Edge Erase screen.
2 Touch the No Erase icon, as illustrated in
Figure 28.
3 Touch the icon that most closely resembles the
Original Orientation for the document on the
Document Glass.
4 Touch Save to return to the Added Features tab.
Figure 28: No Erase option on the
Edge Erase screen