Xerox DOCUCOLOR 12 - Manual (Page 242)

ACCESSORIES 12–12 DOCUCOLOR 12 USER GUIDE
2
3
4
5
6
7
12
Adding staples
1 Open the stapler by grasping the cover at the two
indentations on the upper right and left side and
pulling it straight up and back (Figure 10).
2 Pull the empty cartridge out by holding the gold
handle at the top tabs and pulling the cartridge
straight out (Figure 11). Dispose of the cartridge
according to local regulations.
3 Align the new cartridge so that the bottom white
tabs are on the bottom edge of the metal bracket
and below the black plastic side arms.
4 Push the cartridge firmly to the back until the
cartridge clicks into place.
5 Close the cover by moving it down until it clicks
close.
Figure 10: Opening the stapler
Figure 11: Removing the cartridge