2 quick setup solaris 1.x , 2.x, Overview, Setup – Xerox 701P91273 User Manual

Page 9

Text mode
Original mode

XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION

2-1

2 Quick Setup SOLARIS 1.X , 2.X

Overview:

Quick Setup offers the experienced System Administrator a quick route to printer

installation and configuration.

Setup:

1. Verify physical cable connections from your printer to the network. See

Network

Interface Guide

2. Assign XPrint printer an IP Address at the control panel. See

Appendix B

3. Add your XPrint printer’s TCP/IP address and hostname to your NIS database. For

non NIS networks, add the TCP/IP address and hostname to your machine’s
/etc/hosts table.

4. Verify IP connectivity with the UNIX “ping” command.

5. TYPE: ping <49XX_hostname> [ENTER]

NOTE: To print, the command MUST return 49XX_hostname is alive. If it does

not, then proceed to the TCP/IP Troubleshooting section of the manual.