Xerox 701P91273 - Manual (Page 47)

XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION 15-3
Appendix C Setting up APPSOCKET
1. Press On Line on the Control Panel. Verify the LED to the left of the button is
OUT.
2. Press Menu . The ON-LINE message will disappear and TOP MENU should be
displayed.
3. Press Up+ until appears on the Display Panel and
then press Enter .
The APPSOCKET default settings are:
= =
=
The Mode options are not applicable for APPSOCKET. The setting should
always remain at AutoSelect.
To change the settings, follow these steps:
4. Press Up+ until is displayed and then press Enter .
5. Press Up+ until is displayed and then press Enter .
6. Press Up+ until is displayed and then press Enter .
7. Press Enter while is displayed.
To enable APPSOCKET press Enter while is displayed.
To disable APPSOCKET press Up+ until is displayed and then press
Enter .
8. Press On Line . Verify the LED to the left of this button switches ON.
NOTE: