11 printing model: print server to printer, Overview – Xerox 701P91273 User Manual

Page 27

Text mode
Original mode

XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION

11-1

11 Printing Model: Print server to printer

Overview:

Run the 49XX setup utility to configure your Solaris 1.X / 2.X client to function as a
remote print spooler for lp, lpr, and other XPrint clients on your network. You can
configure the remote print spooler to spool to direct connected (parallel port) or to a
network connected 49XX printer.

Setup:

NOTE: The following instructions assume you have correctly completed the XPrint

49XX PostScript Print Tool installation.

NOTE: You will need to have the device driver name for your parallel port to complete

the following procedure.

1. Become superuser. Run the 49XX printer setup utility:

TYPE: /bin/setup49XX [ENTER]

NOTE: 49XX is model number for the printer model you are installing. For example, if

you are installing XPrint 4920, then the setup command would be

setup4920.