Xerox 701P91273 - Manual (Page 21)

XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION 8-1
8 Installing XPrint PostScript Print Tool from a
Network Installation Site.
Overview:
A network installation of the XPrint PostScript print tool is advisable for large numbers of
installations or for simplicity sake. It is MUCH easier and faster to install XPrint from your
network then from floppy. Of course you will have to have an installation site set up
correctly for you to proceed with the following instructions
Setup:
1. Change to the network directory containing the XPrint installation set. You may have
to mount the remote directory and then run setup:
2. TYPE:
cd [ENTER]
./setup [ENTER]
is the shared directory where the XPrint software was
installed
3. From the Install Print Driver and Utilities menu select option 1.
Install Print Driver and Utilities
1) Install Driver and Utilities
2) Create an installation site.
3) Create Instrallation diskettes
e) Exit
Enter option:
TYPE: 1 [ENTER]
Enter a destination directory for the XPrint print driver when prompted.
The Xprint installation script will automatically start when successfully installed. See
Chapter 4 Installation Overview Section 4 to determine the desired environment
for your XPrint printer.
TYPE: e [ENTER] to exit the printer installation script.