Xerox 4112 - Manual (Page 4)

4
Product Specifications
Print Engine
• Xerographic Engine
• Print speed up to 110 or 125 ppm (8.5" x 11" / A4)
• Typical First Print Out Time (dependent on network conditions and image complexity):
5.1 seconds (standard resolution); 7.0 seconds (high resolution)
• Warm up time from power off: 5 minutes
• Restart time from Low Power Mode: 45 seconds
• Simplex or duplex printing
• Toner Load-While-Running capable
• Up to 1200 x 1200 dpi RIP resolution (High Quality Mode), 600 x 600 dpi RIP resolution
(Standard Quality Mode), and up to 2400 x 2400 dpi print resolution with a halftone
screen.
• 106 lpi (default) with 129 gray levels, or 150 lpi (high quality mode) with 256 gray levels
Paper Handling
Stock weights and capacity (at 20 lb./75 gsm):
• Tray 1: 1,100 sheets (8.5" x 11" / A4); 16 lb Bond to 80 lb Cover (52 to 216 gsm)
• Tray 2: 1,600 sheets (8.5" x 11" / A4); 16 lb Bond to 80 lb Cover (52 to 216 gsm)
• Tray 3-4: 550 sheets each 5.5" x 7.2" (140mm x 182mm) to 13.0" x 19.2" (330mm x
488mm / A5 to SRA3); 16 lb Bond to 80 lb Cover (52 to 216 gsm)
• Tray 5 Bypass Tray: 250 sheets (4" x 6"/102 mm x 152 mm to 13" x 19.2"/330 mm x 488
mm); 16 lb Bond to 140 lb Index (52 to 253 gsm)
• Post Process Inserter (Inserts pre-printed offset and xerographic color documents in a
post fuser manner) 200 sheets (8.5" x 11" to 11" x 17" / A4 to A3); 16 lb Bond to 90 lb
Cover (52 gsm to 220 gsm)
• Optional High Capacity Feeder: 2 trays, 2,000 sheets each (8.5" x 11"/A4); 16 lb Bond
to 80 lb Cover (52 to 216 gsm)
• Optional Oversize High Capacity Feeder: 1 Tray; 2,000 sheets (8" x 10"/B5 to 13” x
19.2”/SRA3); 18 lb to 110 lb (64 to 253 gsm).
Standard Finisher
The standard finisher is fitted with the Post Process Inserter and provides offset stacking, hole-
punch, stapling and a bi-directional decurler. The stapler cuts staples to custom lengths
automatically.
• Multi-position single or dual 100 sheet variable length stapling.
• 2 and 3 hole punch North America; 2 and 4 hole punch Europe and South America
• Built in bi-directional de-curler
• Stacker tray output capacity of up to 3,000 sheets – 20 lb (75 gsm)
• Post Process Inserter capacity of 200 sheets
• Top tray output capacity is up to 500 sheets – 20 lb (75 gsm)
Tolerances for positioning of hole punch and staples are as follows.
• Staple position tolerance +/- 2 mm
• Staple skew 1 mm or less
• Punch position tolerance +/- 2 mm, +/- 1 mm between holes