Xerox 4112 - Manual (Page 12)

12
PPDs and Print Drivers
PPDs are provided for Windows 2000, XP and Vista and for Apple Macintosh.
Product Limitations
• For ordered stock (such multi-part forms), this EPS family is capable of purging unused
sheets, but does not automatically recover from jams with ordered stock. The system will
automatically clear its own paper path as much as possible, but the operator will need to
manually reset the ordered stock to the correct plex. For tab media, this EPS family is
capable of Tab Recovery in the event of a jam.
• Custom media with cut-outs (windows) might not work with this system depending on the
location of the cut-outs because they may interfere with sensors in the machine’s paper path.
Please check custom media with this product to ensure compatibility before committing to the
application. This system cannot feed media with 6” x 1” die cut holes in the center of the
page.
• This product is not DFA compatible and is not available to connect online with third party
vendor finishing devices.
• Saved print jobs from a previous Xerox copier/printer, such as the Xerox 4110, 4590 or 4595,
cannot be directly moved to the 4112 EPS or 4127 EPS. However, print jobs may be
exported as image files and then resubmitted.
• This FreeFlow PrintServer for this Copier/Printer will be IPv6 compatible in 2008 as a
software upgrade.
User Interface
The User Interface (UI) is a Xerox branded application on an embedded controller. The display is
mounted on the Copier/Printer and utilizes a combination touch-screen and keypad on the bezel.
The Operating System on the embedded controller is an RTOS (Real Time Operating System)
unrelated to popular desktop systems and cannot run typical off-the-shelf customer applications.
The particulars of the RTOS can be provided to Xerox partners who develop customized
applications.
Media Selection
Every effort has been made to ensure that this system supports a broad range of media. Keep in
mind, however, that using only Xerox-recommended media maximizes reliability and paper-
handling performance.
Certain types of Xerox supplied specialty media have been approved to run in this system within
certain guidelines.
• Tabs
• Preprinted offset
• Transparencies
• Carbonless*
• Coated paper
* This system can run Xerox-brand collated carbonless stock, not to be confused with NCR-brand
carbonless or non-collated carbonless which is not recommended because of reduced print
quality results and negative impact to print reliability. When using carbonless stock,
- reliability may decrease
- special technical representative cleaning procedures are required (not covered by FSMA).
Although this system is approved to run Xerox-brand collated carbonless stock applications, it is