Zebra Technologies S-300 - Manual (Page 58)

Optional Printer Fonts
There are many optional character fonts that can be purchased for your Stripe in
addition to those which are standard in the unit. From time to time, additions may be
made to the list of available fonts. Contact Zebra Technologies Corporation or your
sales representative for further information.
Only one additional font can be installed in the printer at a time. This installation
should be performed by a service technician. Once installed, this font can be used in
addition to the standard fonts available in the printer. Refer to your ZPL Programming
Guide or, if using another software package to drive your printer, to the instructions
accompanying that package.
Once an optional font is installed in the printer, the Configuration Printout produced
during the CANCEL Key Self Test will indicate the font type as the “ Socket 2 ID” .
Optional Printer Fonts Currently Available
Scalable Smooth Fonts (each is
supplied as a complete set of
Normal, Bold, Italic, and Bold
Italic styles)
Bitmap Smooth Fonts (supplied
only in Bold). Type sizes: 6 pt, 8
pt, 10 pt, 12 pt, 12 pt, 14 pt, 18
pt, 24 pt.
CG Triumvirate  CG Triumvirate 
— CG Triumvirate  Condensed*
CG Times  CG Times 
CG Palacio  CG Palacio 
Futura  Futura 
Univers ® Univers ®
*When equipped with the Bitmap CG Triumvirate

Bold Condensed Font, the S-500 has the same font styles as the S-300 printer.
Figures 33 and 34 illustrate the optional fonts, and Figure 35 shows sample point sizes
for the bitmap smooth fonts.
Compugraphic is a Registered Trademark and CG Triumvirate, CG Triumvirate
Condensed, CG Palacio, and CG Times are all Trademarks of AGFA Corporation.
Futura is a trademark of Fundicion Tipografica Neufville, S.A.
Univers is a registered trademark of Linotype AG and/or its subsidiaries.
Specifications
50