Zebra Technologies S-300 - Manual (Page 56)

Standard Printer Fonts
For more information on fonts, refer to your ZPL II Programming Guide.
8 Dots/mm Printhead
Fonts
Dot Matrix
(h x w)
(Defaults)
Type*
Minimum
Character
Size (h x w)
Max
Char
/In
A 9 x 5 U-L-D .044 ″ x .030 ″ 33.3
B 11 x 7 U .054 ″ x .044 ″ 22.7
C, D 18 x 10 U-L-D .089 ″ x .059 ″ 16.9
E 28 x 15 OCR-B .138 ″ x .098 ″ 10.2
F 26 x 13 U-L-D .128 ″ x .079 ″ 12.7
G 60 x 40 U-L-D .295 ″ x .236 ″ 4.2
H 21 x 13 OCR-A .103 ″ x .093 ″ 10.8
GS 24 x 24 SYMBOL .118" x .118" 8.5
Ø 15 x 12 SCALABLE (SMOOTH) FONT
6 Dots/mm Printhead
Font
Dot Matrix
(h x w)
(Defaults)
Type*
Minimum
Character
Size (h x w)
Max
Char
/In
A 9 x 5 U-L-D .059 ″ x .039 ″ 25.4
B 11 x 7 U .072 ″ x .059 ″ 16.9
C, D 18 x 10 U-L-D .118 ″ x .079 ″ 12.7
E 21 x 10 OCR-B .138 ″ x .085 ″ 11.7
F 26 x 13 U-L-D .170 ″ x .105 ″ 9.53
G 60 x 40 U-L-D .394 ″ x .315 ″ 3.18
H 17 x 11 OCR-A .111 ″ x .098 ″ 10.2
GS 24 x 24 SYMBOL .157 ″ x .157 ″ 6.35
Ø 15 x 12 SCALABLE (SMOOTH) FONT
* Type: U - Upper Case, L - Lower Case, D - Descenders
•
Bit-mapped fonts A, B, D, E, F, G, H, and GS are expandable up to 10 times,
height- and width-independent. However, fonts E and H (OCR-B and OCR-A)
are not considered in-spec when expanded.
•
The Scalable Smooth Font (CG Triumvirate

Bold Condensed) is
expandable on a dot-by-dot basis, height- and width-independent, while
maintaining smooth edges, to a maximum of 1500 x 1500 dots.
•
IBM Code Page 850 International characters available in fonts A, B, D,
E, F, G and Ø through software control.
Specifications
48