Xantrex Technology RS232-XPD - Manual (Page 29)

Installation and Configuration
Power Supply Settings
Release 1.2 27
Power Supply Settings
For serial communication, the computer and the RS-232 interface must share the
same communication settings. Make sure that the settings of the computer and of
the power supply agree with those shown in Table 2.11.
Table 2.11 Power Supply Settings
Parameter Setting
Transmission Asynchronous
Mode Full Duplex
Speeds 75, 150, 300, 600, 1200, 2400, 4800, 9600
Parity None
Connector DB9-pin Male
Start Bit 1
Stop Bit 1
Data Bits 8
Protocols XON/XOFF
CTS/RTS (DSR/DTR)
NONE