ZyXEL Communications Omni 288S User Manual
Page 74
Chapter 9 - Fax Operation
9-12
Response
Value
Function and Description
hsc=
20-3F
Transmit phase B hang up codes. Refer to
TIA-592 for details.
hsc=
40-4F
Transmit phase C hang up codes. Refer to
TIA-592 for details.
hsc=
50-6F
Transmit phase D hang up codes. Refer to
TIA-592 for details.
hsc=
70-8F
Receive phase B hang up codes. Refer to TIA-
592 for details.
hsc=
90-9F
Receive phase C hang up codes. Refer to TIA-
592 for details.
hsc=
A0-BF
Receive phase D hang up codes. Refer to TIA-
592 for details.
+FIS:vr, br, wd, ln
df, ec, bf, st
emote fax station capabilities (DIS frame
information) response refer to +FIS=...
command for a description of sub-parameters.
+FNC:
"NSC FIF string"
Report NSC (non-standard Commands) frame
+FNF:
"NSF FIF string"
Report NSF (non-standard Facilities) frame.
+FNS:
"NSS FIF string"
Report NSS (non-standard Setup) frame.
+FPI:
"CIG ID string"
Report remote ID response-Polling Station ID
(CIG).
+FPO
Remote polling indication.
+FPS:ppr, lc, blc,
cblc, lbc
.30 phase C page reception response:
ppr=1
Received page good.
ppr=2
Page bad; retrain requested.
ppr=3
Page good; retrain requested.
ppr=4
Page good; remote request for procedure
interrupt accepted.
ppr=5
Page bad; retrain requested; remote request
for procedure interrupt accepted.
The receiving DCE may count
and report them:
lc: line count
blc: bad line count
cblc: maximum consecutive bad line count
lbc: lost byte count
+FTC: vr, br, wd, ln,
df, ec, bf, st
emote fax station capabilities (DCT frame
information) response refer to +FIS=...
command for the description of sub-