ZyXEL Communications Network Device P-2302 - Manual (Page 84)

Chapter 5 Wireless LAN
P-2302HWUDL-P1 Series User’s Guide
84
"
If you do not enable any wireless security on your ZyXEL Device, your network
is accessible to any wireless networking device that is within range.
Figure 38 Wireless: No Security
The following table describes the labels in this screen.
5.4.2 WEP Encryption Screen
In order to configure and enable WEP encryption; click Network > Wireless LAN to display
the General screen. Select Static WEP from the Security Mode list.
Table 31 Wireless No Security
LABEL DESCRIPTION
Security Mode Choose No Security from the drop-down list box.