ZyXEL Communications Network Device P-2302 - Manual (Page 275)

Chapter 24 Tools
P-2302HWUDL-P1 Series User’s Guide
275
If the upload is not successful, the following screen appears.
Figure 185 Firmware Upload Error
Click Return to go back to the Firmware Screen .
24.2.3 Configuration Screen
Use this screen to back up or restore the configuration of the ZyXEL Device. You can also use
this screen to reset the ZyXEL Device to the factory default settings. To access this screen,
click Maintenance > Tools > Configuration.
Figure 186 Maintenance > Tools > Configuration
Each field is described in the following table.
Table 128 Maintenance > Tools > Configuration
LABEL DESCRIPTION
Backup
Configuration
Backup Click this to save the ZyXEL Device’s current configuration to a file on your
computer. Once your device is configured and functioning properly, it is highly
recommended that you back up your configuration file before making configuration
changes. The backup configuration file is useful if you need to return to your
previous settings.
Restore
Configuration