3 isp parameters – ZyXEL Communications Network Device P-2302 User Manual
Page 50
Chapter 3 Wizard Setup
P-2302HWUDL-P1 Series User’s Guide
50
The following table describes the labels in this screen.
3.2.3 ISP Parameters
This screen depends on the Connection Type you select.
3.2.3.1 Ethernet
"
You cannot use the
if you subscribe to a Roadrunner
service. You must use the screens discussed in
Figure 14 Connection Wizard > ISP Parameters (Ethernet)
The following table describes the labels in this screen.
Table 6 Connection Wizard > System Information
LABEL
DESCRIPTION
System Name
Enter your computer's "Computer Name". See
for more
information. This is for identification purposes, but some ISPs also check this field.
This name can be up to 30 alphanumeric characters long. Spaces are not allowed,
but dashes “-” and underscores "_" are accepted.
Domain Name
Enter the domain name entry that is propagated to DHCP clients on the LAN. If
you leave this blank, the domain name obtained from the ISP is used. Use up to
38 alphanumeric characters. Spaces are not allowed, but dashes “-” and periods
"." are accepted.
< Back
Click this to go to the previous screen.
Next >
Click this to go to the next screen.
Exit
Click this to close this screen and return to the main screen.
Table 7 Connection Wizard > ISP Parameters (Ethernet)
LABEL
DESCRIPTION
Connection Type
Select Ethernet.
< Back
Click this to go to the previous screen.