ZyXEL Communications Network Device P-2302 - Manual (Page 73)

Chapter 4 Status Screens
P-2302HWUDL-P1 Series User’s Guide
73
4.5 BW MGMT Monitor Window
To access this screen, open the Status screen (see Section 4.1 on page 67 ), and click (Details
...) next to BW MGMT Monitor.
Protocol This field displays the transport protocol the SIP account is currently using.
Message Waiting This field indicates whether or not there are any messages waiting for the SIP
account.
Last Incoming
Number
This field displays the last number that called the SIP account. It displays N/A if no
number has ever dialed the SIP account.
Last Outgoing
Number
This field displays the last number the SIP account called. It displays N/A if the
SIP account has never dialed a number.
Call Statistics
Phone This field displays each phone port in the ZyXEL Device.
Hook This field indicates whether the phone is on the hook or off the hook.
On - The phone is hanging up or already hung up.
Off - The phone is dialing, calling, or connected.
Status This field displays the current status of each call.
DIAL - The ZyXEL Device is dialing the current call.
RING - The phone is ringing because there is an incoming call.
Process - The call is connected and in process.
DROP - The ZyXEL Device is hanging up (disconnecting) the current call.
DISC - The ZyXEL Device has hung up.
N/A - There is no phone connected to this phone port.
Codec This field displays the type of voice compression used in the current call.
Peer Number If the current call is a peer-to-peer call, this field displays the SIP number of the
other party. Otherwise, it displays N/A.
Duration This field displays how long the current call has lasted.
Tx Pkts This field displays the number of packets the ZyXEL Device has transmitted in the
current call.
Rx Pkts This field displays the number of packets the ZyXEL Device has received in the
current call.
Tx B/s This field displays how quickly the ZyXEL Device has transmitted packets in the
current call. The rate is the number of kilobits transmitted one second before the
last time the screen updated (refreshed).
Rx B/s This field displays how quickly the ZyXEL Device has received packets in the
current call. The rate is the number of kilobits received one second before the last
time the screen updated (refreshed).
Poll Interval Enter how often you want the ZyXEL Device to update this screen, and click Set
Interval.
Set Interval Click this to make the ZyXEL Device update the screen based on the amount of
time you specified in Poll Interval.
Stop Click this to make the ZyXEL Device stop updating the screen.
Table 25 VoIP Statistics Window
LABEL DESCRIPTION