ZyXEL Communications Network Device P-2302 - Manual (Page 51)

Chapter 3 Wizard Setup
P-2302HWUDL-P1 Series User’s Guide
51
3.2.3.2 PPPoE
Point-to-Point Protocol over Ethernet (PPPoE) functions as a dial-up connection. PPPoE is an
IETF (Internet Engineering Task Force) standard specifying how a host personal computer
interacts with a broadband modem (for example DSL, cable, wireless, etc.) to achieve access
to high-speed data networks.
"
You cannot use the Connection Wizard if the PPPoE remote server cannot be
discovered automatically. You must use the screens discussed in Chapter 6 on
page 95 instead.
Figure 15 Connection Wizard > ISP Parameters (PPPoE)
The following table describes the labels in this screen.
Next > Click this to go to the next screen.
Exit Click this to close this screen and return to the main screen.
Table 7 Connection Wizard > ISP Parameters (Ethernet)
LABEL DESCRIPTION
Table 8 Connection Wizard > ISP Parameters (PPPoE)
LABEL DESCRIPTION
Connection Type Select PPP over Ethernet.
Service Name Enter the PPP service name provided by your ISP. If your ISP did not provide a
service name, leave this field blank.
User Name Enter the user name provided by your ISP.
Password Enter the password provided by your ISP.
< Back Click this to go to the previous screen.
Next > Click this to go to the next screen.
Exit Click this to close this screen and return to the main screen.