5 restart screen – ZyXEL Communications Network Device P-2302 User Manual
Page 277
Chapter 24 Tools
P-2302HWUDL-P1 Series User’s Guide
277
If the ZyXEL Device’s IP address is different in the configuration file you selected, you may
need to change the IP address of your computer to be in the same subnet as that of the default
management IP address (192.168.5.1). See your Quick Start Guide or the appendices for
details on how to set up your computer’s IP address.
You might have to open a new browser to log in again.
If the upload was not successful, a Configuration Upload Error screen appears.
Figure 189 Configuration Upload Error
Click Return to go back to the
24.2.5 Restart Screen
Use this screen to reboot the ZyXEL Device without turning the power off. To access this
screen, click Maintenance > Tools > Restart.
Figure 190 Maintenance > Tools > Restart
This does not affect the ZyXEL Device’s configuration. When you click Restart, the
following screen appears.
Figure 191 Maintenance > Tools > Restart > In Progress
Wait one minute for the device to finish restarting. Then, you can log in again.