Yamaha WH39070 - Manual (Page 35)

35
3
Basic oper
ations on the LS9
LS9-16/32 Owner’s Manual
Using the tool buttons
The title bar at the top of some popup windows and screens contains tool buttons that provide
additional functions. You can use these buttons to recall related libraries, or to copy the parame-
ters of a channel to a different channel. Here we will explain how to use the tool buttons.
Tool buttons like the following are shown in the ATT/
HPF/EQ, DYNAMICS 1/2, GEQ, and EFFECT popup
windows and screens.
1 LIB (library) button
This button recalls the library that is related to the current
popup window or screen (EQ, dynamics, GEQ, or effect
library).
B DEF (default) button
This button restores the currently selected channel (EQ/
dynamics) or rack (effect) to the default state.
C COPY button
This button copies the settings of the currently selected
channel (EQ/dynamics) or rack (GEQ/effect). The copied
settings are held in buffer memory (a memory area for
temporary storage).
D PASTE button
This button pastes the settings held in buffer memory into
the currently selected channel (EQ/dynamics) or rack
(GEQ/effect).
E COMPARE button
This button exchanges the settings held in buffer memory
with the settings of the currently selected channel (EQ/
dynamics) or rack (GEQ/effect).
In addition, some screens have the following tool buttons.
• SET ALL ...............Turns on all of the parameters in the
screen.
• CLEAR ALL..........Turns off all of the parameters in the
screen.
Here we will explain the basic procedure for using librar-
ies. You can use libraries to store (save) or recall (load)
the settings of the currently selected channel (EQ/dynam-
ics) or rack (GEQ/effect).
The following libraries are provided.
• Input EQ library
• Output EQ library
• Dynamics library
• GEQ library
• Effect library
The operating procedure is essentially the same for all
libraries.
● Recalling data from a library
1
Access a popup window or screen that con-
tains tool buttons.
To access each popup window or screen, proceed as
follows.
[ ATT/HPF/EQ popup window ]
[ DYNAMICS 1/2 popup window ]
Using the tool buttons
About the tool buttons
1 2 3 4 5
• You cannot press the PASTE button or COMPARE button if no set-
tings have been copied into buffer memory.
NOTE
Using libraries