Yamaha WH39070 - Manual (Page 137)

137
Editing scene memories
LS9-16/32 Owner’s Manual
13
Scene memor
y
7
To execute the Paste operation, move the
cursor to the OK button and press the
[ENTER] key.
The scene stored in the buffer memory will be pasted
to the scene number you selected in step 5. If you
decide to cancel the Paste operation, use the CANCEL
button instead of the OK button.
Here’s how to clear a specified scene.
1
In the DISPLAY ACCESS section, press the
[SCENE MEMORY] key to access any one of
the SCENE MEMORY screens.
2
Make sure that the cursor is located some-
where other than the constant display area,
and use the dial or the [DEC]/[INC] keys to
select the scene number that you want to
clear.
3
Move the cursor to the CLEAR button and
press the [ENTER] key.
A dialog box will ask you to confirm the Clear opera-
tion.
4
To execute the Clear operation, move the
cursor to the OK button and press the
[ENTER] key.
The scene number you selected in step 2 will be
cleared. If you decide to cancel the Clear operation,
use the CANCEL button instead of the OK button.
• Be aware that when you paste to a scene number in which a
scene has already been stored, the existing scene will be
overwritten.
• Read-only scenes or write-protected scenes cannot be
pasted.
NOTE
Clearing a scene
• Read-only scenes or write-protected scenes cannot be
cleared.
NOTE